ホーム > 評価・報告

評価・報告

主要な研究論文

  • T. Fukuda, H. Maeda, M. Yasui, T. Kakeshita, “Influence of magnetocrystalline anisotropy on martensitic transformation under magnetic field of single-crystalline Ni2MnGa”, Scripta Materialia, 60[4], 261-263 (2009).

  • S. Kirihara, M. Kaneko, T. Niki, “Terahertz Wave Control Using Ceramic Photonic Crystals with a Diamond Structure Including Plane Defects Fabricated by Microstereolithography”, International Journal of Applied Ceramic Technology, 6[1] 41-44 (2009).

  • H. Kushida, K. Hata, T. Fukuda, T. Terai, T. Kakeshita, “Equilibrium phase diagram of Ni2MnGa under [0 0 1] compressive stress”, Scripta Materialia, 60 [4], 96-99 (2009).

  • Y. Mikami, Y. Morikage, M. Mochizuki, M. Toyoda, “Angular Distortion of Fillet Welded T Joint Using Low Transformation Temperature Welding Wire”, Science and Technology of Welding and Joining, 14[2], 97-105 (2009).

  • M. Mochizuki, G.B. An, M. Toyoda,, “Thermal Elastic-Plastic Analysis Considering Temperature Rise by Rapid Plastic Deformation in Undermatched Joints”, Journal of Pressure Vessel Technology, 131[3], 031202-1 - 9 (2009).

  • H. Onishi, S. Ueno, S.K. Hyun, H. Nakajima, “Fabrication of Lotus-Type Porous Cobalt and Silicon through Decomposition of Moisture”, Metallurgical and Materials Transactions A, 40[2], 438-443 (2009).

  • C.L. Chen, H. Furusho, H. Mori, “In situ TEM observation of decomposition of high-purity sapphire”, Philosophical Magazine Letters, 89[2], 113-119 (2009).

  • H. Tsuchiya, T. Akaki, J. N., D. Terada, N. Tsuji, Y. Koizumi, Y. Minamino, P. Schmuki, S. Fujimoto, “Anodic oxide nanotube layers on Ti-Ta alloys: Substrate composition, microsturcture and self-organization on two-size scales”, Corrosion Science, 51[7], 1528-1533 (2009).

  • H. Yasuda, Y. Yamamoto, N. Nakatsuka, T. Nagira, M. Yoshiya, A. Sugiyama, I. Ohnaka, K. Umetani, K. Uesugi, “In-situ observation of nucleation, fragmentation and microstructure evolution in Sn-Bi and Al-Cu alloys”, International Journal of Cast Metals Research, [採録決定済].

  • T. Nagase, T. Hosokawa, K. Takizawa, Y. Umakoshi, “Electron-irradiation-induced nano-crystallization in quasicrystal-forming Zr-based metallic glass”, Intermetallics, 17[8] 657-668 (2009).

  • Y. Terai, T. Tokuno, H. Ichida, Y. Kanematsu, Y. Fujiwara, “Electroluminescence properties of GaInP/GaAs:Er,O/GaInP double heterostructure light-emitting diodes at low temperature”, Optical Materials, 31[9], 1323-1326 (2009).

  • H. Tsuchiya, T. Akaki, J. Nakata, D. Terada, N. Tsuji, Y. Koizumi, Y. Minamino, P. Schmuki, S. Fujimoto, “Metallurgical aspects on the formation of self-organized anodic oxide nanotube layers”, Electrochimica Acta, 54[22] 5155-5162 (2009). 【成果トピックス参照】

  • H. Fujii, Y. Yamaguchi, S. Kiguchi, K. Nogi, “Surface Hardening of Cast Irons by Friction Stir Processing”, Materials Transactions, 49[12], 2837-2843 (2008).

  • M. Yasui, T. Terai, T. Kakeshita, M. Matsuda, N. Metoki, H. Nojiri, “Neutron diffraction study of magnetic structure in DyCu under magnetic field”, Journal of Applied Physics, 103, 07B710 - 1-3 (2008). 【成果トピックス参照】

  • Y. Fujiwara, S. Takemoto, T. Tokuno, K. Hidaka, H. Ichida, M. Suzuki, Y. Terai, “Mechanism of excitation and relaxation in Er,O-codoped GaAs for 1.5μm light-emitting devices with extremely stable wavelength”, Physica Status Solidi (a), 205[1], 64-67 (2008).

  • H. Fujii, T. Sato, S.P. Lu, K. Nogi, “Development of Advanced A-TIG (AA-TIG) Welding Method by Control of Marangoni Convection”, Materials Science and Engineering A, 495[1-2], 296-303 (2008).

  • Y. Akada, H. Tatsumi, T. Yamaguchi, A. Hirose, T. Morita, E. Ide, “Interfacial Bonding Mechanism Using Silver Metallo-Organic Nanoparticles to Bulk Metals and Observation of Sintering Behavior”, Materials Transactions, 49[7], 1537-1545 (2008).

  • E. Bonnot, L. Mañosa, A. Planes, D. Soto-Parra, E. Vives, B. Ludwig, C. Strothkaemper, T. Fukuda, T. Kakeshita, “Acoustic emission in the fcc-fct martensitic transition of Fe68.8Pd31.2”, Physical Review B, 78[18], 184103-1-7 (2008).

  • S. Sato, T. Yoshikawa, M. Nakamoto, T, Tanaka, J. Ikeda, “Application of hydrothermal treatment on BF slag and waste glass for preparing lubricant materials in high strain rolling for ultrafine-grained steel production”, ISIJ International, 48[2], 245-250 (2008).

  • Y. Setsuhara, K. Takenaka, A. Ebe, J. G. Han, “Properties of Argon/Oxygen Mixture Plasmas Driven by Multiple Internal-Antenna Units”, Surface and Coatings Technology, 202[22-23], 5230-5233 (2008).

  • K. Takenaka, H. Nakayama, Y. Setsuhara, H. Abe, K. Nogi, “Modification of Yttrium-Iron-Oxide Nanoparticle Films Using Inductively-Coupled Plasma Annealing”, Surface and Coatings Technology, 202[22-23], 5336-5338 (2008).

  • H.Y. Yasuda, K. Yamaoka, Y. Oda, Y. Umakoshi, “Tension-compression asymmetry of pseudoelasticity in Fe-23.0at.%Al single crystals”, Scripta Materialia, 59[7], 738-741 (2008).

  • R. Nakamura, D. Tokozakura, J.-G. Lee, H. Mori, H. Nakajima, “Shrinking of hollow Cu2O and NiO nanoparticles at high temperatures”, Acta Materialia, 56[18], 5276-5284 (2008). 【成果トピックス参照】

  • H. Utsunomiya, H. Koh, J. Miyamoto, T. Sakai, “High-Strength Porous Copper by Cold-Extrusion”, Advanced Engineering Materials, 10[9], 826-829 (2008).

  • M. Suzuki, T. Tanaka, “Composition dependence of microstructures formed by phase separation in multi-component silicate glass”, ISIJ International, 48[4], 405-411 (2008).

  • D. Terada, H. Houda, N. Tsuji, “Effect of Strain on ‘Hardening by Annealing and Softening by Deformation’ Phenomena in Ultrafine Grained Aluminum”, Journal of Materials Science, 43[23-24], 7331-7337 (2008).

  • H. Utsunomiya, Y. Tamura, T. Yukimoto, T. Sakai, “Change in Vickers Hardness Statistics of Aluminum with Plastic Deformation”, Steel Research International, 79[2], 826-829 (2008).

  • D. Kim, S. Fujimoto, P. Schmuki, H. Tsuchiya, “Nitrogen doped anodic TiO2 nanotubes grown from nitrogen-containing Ti alloys”, Electrochemistry Communications, 10[6], 910-913 (2008).

  • T. Nakano, T. Ishimoto, J.-W. Lee, Y. Umakoshi, “Preferential orientation of biological apatite crystallite in original, regenerated and diseased cortical bones”, Journal of the Ceramic Society of Japan, 116[1350], 313-315 (2008).

  • H. Y. Yasuda, Y. Oda, M. Aoki, K. Fukushima, Y. Umakoshi, “Multimode pseudoelasticity in Fe-23.8at.%Ga single crystals with D03 structure”, Intermetallics, 16[11-12], 1298-1304 (2008).

  • H. Yasuda, Y. Yamamoto, N. Nakatsuka, T. Nagira, M. Yoshiya, A. Sugiyama, I. Ohnaka, K. Umetani, K. Uesugi, “In-situ observation of nucleation, fragmentation and microstructure evolution in Sn-Bi and Al-Cu alloys”, International Journal of Cast Metals Research, 21[1-4], 125-128 (2008).

  • T. Yoshikawa, S. Sato, T. Tanaka, “Fabrication of low temperature foaming glass materials using hydrothermal treatment”, ISIJ International, 48[2], 130-133 (2008).

  • Y. Terai, K. Hidaka, K. Fujii, S. Takemoto, M. Tonouchi, Y. Fujiwara, “Ultrafast carrier-capturing in GaInP/Er,O-codoped GaAs/GaInP laser diodes grown by organometallic vapor phase epitaxy”, Applied Physics Letters, 93[23], 231117 1-3 (2008). 【成果トピックス参照】

  • S. Syed, Y. Endo, T. Sato, Y. Kawamura, R. Nakatani, “Change of Magnetic Properties and Structure in Fe3O4 Films on Si Substrates with Annealing Temperature”, Materials Transactions, 49[1], 175-178 (2008).

  • M. Suzuki, T. Tanaka, “Materials design for the fabrication of porous glass using phase separation in multi-component borosilicate glass”, ISIJ International, 48[11], 1524-1532 (2008). 【成果トピックス参照】

  • Y. Shiratsuchi, R. Nakatani, M. Yamamoto, “Contribution of Langevin behavior to the low temperature maximum of zero-field-cooled magnetization in the discontinuous Fe films”, Journal of Applied Physics, 103[7] 07B503-1-3 (2008). 【成果トピックス参照】

  • M. Mizuno, H. Araki, Y. Shirai, “First-principles study of vacancy formation in LaNi5”, Journal of Physics: Condensed Matter, 20[27], 275232-1-5 (2008).

  • M. Tane, S. Akita, T. Nakano, K. Hagihara, Y. Umakoshi, M. Niinomi, H. Nakajima, “Peculiar elastic behavior of Ti-Nb-Ta-Zr single crystals”, Acta Materialia, 56[12], 2856-2863 (2008). 【成果トピックス参照】

  • S. Suzuki, H. Utsunomiya, H. Nakajima, “Equal-Channel Angular Extrusion Process of Lotus-Type Porous Copper”, Materials Science and Engineering A, 490[1-2], 465-470 (2008).

  • S. Farjami, M. Yasui, T. Fukuda, T. Kakeshita, “Selected formation of a variant in L10-type CoPt realized by ordering heat treatment under a magnetic field”, Scripta Materialia, 58[10], 811-814 (2008).

  • Y. K. Zhang, J. Gao, D. Nagamatsu, T. Fukuda, H. Yasuda, M. Kolbe, J. C. He, “Reduced droplet coarsening in electromagnetically levitated and phase-separated Cu-Co alloys by imposition of a static magnetic field”, Scripta Materialia, 59[9], 1002-1005 (2008).

  • T. Ueno, H. Utsunomiya, T. Sakai, “Deformation and Texture Evolution During Differential Friction Rolling of Aluminum Sheet”, Steel Research International, 79[2], 168-175 (2008).

  • K. Sasaki, T. Nakano, J.D. Ferrara, J.-W. Lee, T. Sasaki, “New technique for evaluation of preferential alignment of biological apatite (BAp) crystallites in bone using transmission X-ray diffractometry”, Materials Transactions, 49[9], 2129-2135 (2008).

  • K. Shimada, Y. Terai, S. Takemoto, K. Hidaka, Y. Fujiwara, M. Suzuki, M. Tonouchi, “Terahertz radiation from Er,O-codoped GaAs surface grown by organometallic vapor phase epitaxy,”, Applied Physics Letters, 92[11], 111115 1-3 (2008).

  • Y. Setsuhara, D. Tsukiyama, K. Takenaka, K. Ono, “Simulation-Aided Designing of Meter-Scale Large-Area Plasma Source with Multiple Low-Inductance Antenna Modules”, Japanese Journal of Applied Physics, 47[8], 6903-6906 (2008).

  • K. Takenaka, Y. Setsuhara, K. Nishisaka, A. Ebe, “Characterization of Ion Energy Distribution in Inductively-Coupled Argon Plasmas Sustained with Multiple Internal Antenna Units”, Japanese Journal of Applied Physics, 47[8], 6900-6902 (2008).

  • K. Yamaoka, Y. Yoshizako, Y. Terai, Y. Fujiwara, “Room-temperature deposition of highly-insulating SiOCH films by plasma-enhanced chemical vapor deposition using tetraethoxysilane”, Thin Solid Films, 517[2], 479-482 (2008).

  • K. Alvarez, S.K. Hyun, H. Tsuchiya, S. Fujimoto, H. Nakajima, “Corrosion behaviour of Lotus-type porous high nitrogen nickel-free stainless steels”, Corrosion Science, 50[1], 183-193 (2008).

  • Y. Endo, H. Fujimoto, Y. Kawamura, R. Nakatani, M. Yamamoto, “Effect of the Dot Separation on the Switching Behavior of Ni-Fe Elliptical Dot Arrays”, IEEE Transaction on Magnetics, 44[11], 2718-2721 (2008).

  • T. Yoshikawa, M. Hosokawa, T. Tanaka, “MgO Effect on the Hydrothermal Solidification of Blast Furnace Slag”, ISIJ International, 48[5], 557-562 (2008).

  • S.P. Lu, H. Fujii, K.Nogi, “Marangoni Convection and Weld Shape Variations in He-CO2 Shielded Gas Tungsten Arc Welding on SUS304 Stainless Steel”, Journal of Materials Science,43[13], 4583-4591 (2008).

  • K. Sugita, M. Mizuno, H. Araki, Y. Shirai, “Electronic Structure and Bonding in Amorphous Zr67Ni33 and Zr67Cu33”, Advances in Quantum Chemistry, 54, 161-174 (2008).

  • Y. Setsuhara, T. Sera, K. Takenaka, “Discharge Profiles of Internal-Antenna-Driven Inductively-Coupled Plasmas”, Surface and Coatings Technology, 202[22-23], 5234-5237 (2008).

  • Y. Endo, H. Fujimoto, S. Kumano, Y. Matsumura, I. Sasaki, Y. Kawamura, M. Yamamoto, R. Nakatani, “Study on the magnetization reversal process in a magnetic nanowire and a magnetic dot oberved by magnetic field sweeping magnetic force microscopy measurement (invited)”, Journal of Applied Physics, 103[7], 07D918 - 1-6 (2008).

  • K. Arakawa, K. Ono, M. Isshiki, K. Mimura, M. Uchikoshi, H. Mori, “Observation of the one-dimensional diffusion of nanometer-sized dislocation loops”, Science, 318[5852], 956-959 (2007).【成果トピックス参照】

  • Y. Shiratsuchi, M. Yamamoto, “Dominant factor of zero- field-cooled magnetization in discontinuous Fe films”, Physical Review B, 76[14], 144432-1 - 144432-10 (2007). 【成果トピックス参照】

  • N. Kamikawa, T. Sakai, N. Tsuji, “Effect of Redundant Shear Strain on Microstructure and Texture Evolution during Accumulative Roll-Bonding in Ultralow Carbon IF Steel”, Acta Materialia, 55[17], 5873-5888 (2007).

  • T. Nagira, H. Yasuda, T. Sakimura, A. Kawaguchi, “Effects of shaping conditions on the microstructure and the mechanical property of the Al2O3-YAG eutectic composite produced by melting the Al2O3-YAP eutectic structure”, Materials Transactions, 48[9] 2312-2315 (2007).

  • S.P. Lu, H. Fujii, K. Nogi , T.Sato, “Effect of Oxygen Content in He-O2 Shielding Gas on Weld Shape in Ultra Deep Penetration TIG”, Science and Technology of Welding and Joining, 12[8], 689-695 (2007).

  • N. Takata, S.-H. Lee, C.-Y. Lim, S.-S. Kim, N. Tsuji, “Nanostructured Bulk Copper Fabricated by Accumulative Roll Bonding”, Journal of Nanoscience and Nanotechnology, 7[11], 3985-3989 (2007).

  • Y. Endo, Y. Matsumura, H. Fujimoto, R. Nakatani, M. Yamamoto, “Observation of magnetization reversal process in Ni-Fe nanowire using magnetic field sweeping-magnetic force microscopy”, Japanese Journal of Applied Physics, 46, L898-L890 (2007).

GCOE活動に関する公表文献

大阪大学グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」,
大阪大学 低温センターだより No.147 (2009) pp.14-16.

大阪大学グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」,
化学と工業, 61(8),(2008) 学術案内ページ3-11.

掛下知行:
グローバルCOE　第2回　構造・機能先進材料デザイン教育研究拠点,
大阪大学工業会誌 テクノネット No.546 (2009) pp.19-20.

大阪大学グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」,
生産と技術, 60(3), (2008) pp.90-92.

「21世紀COEの終了とグローバルCOE『構造・機能先進材料デザイン教育研究拠点』の発足にあたって」,
大阪冶金会誌, 48 (2008) pp.123-124.

白土優:
大阪大学グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」
反強磁性α-Cr2O3薄膜を用いた垂直交換バイアスと磁気異方性の変化
大阪大学 低温センターだより No.154 (2011) pp.7-13.

若手研究者による研究連携体制の構築　21世紀COEプログラム「構造・機能先進材料デザイン研究拠点の形成」
日本ロボット学会誌, 25[3], (2007) pp.35-37.

大学大競争　「トップ30」から「COE」へ
読売新聞大阪本社編, 中央公論新社, 東京 (2003) pp.155-157.

永瀬丈嗣:
大阪大学グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」,
金属ガラスの極低温電子照射に対する安定性,
大阪大学 低温センターだより No.148 (2009) pp.9-12.

保田英洋:
大阪大学グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」,
電子ビームで拓くナノ物質材料科学の新領域
−ナノキャラクタリゼーションからナノプロセッシングへ−
大阪大学 低温センターだより No.152 (2010) pp.6-13.

安田弘行:
大阪大学グローバルCOEプログラム「構造・機能先進材料デザイン教育研究拠点」,
Fe3Ga単結晶の低温における超弾性挙動,
大阪大学 低温センターだより No.151 (2010) pp.14-19.