K. Hagihara, T. Tanaka, H. Izuno, Y. Umakoshi, and T. Nakano:
Non-basal slips in Ni₃(Ti, Nb) and Ni₃(Ti, Al) single crystals with various long-period stacking ordered structures,
Acta Materialia, 61 (2013), pp.4365-4373.
DOI: org/10.1016/j.actamat.2013.04.008.

Takuya Ishimoto, Takayoshi Nakano*, Yukichi Umakoshi, Masaya Yamamoto, Yasuhiko Tabata:
Degree of Biological Apatite c-Axis Orientation Rather Than Bone Mineral Density Controls Mechanical Function in Bone Regenerated Using Recombinant Bone Morphogenetic Protein-2,
Journal of Bone and Mineral Research (JBMR), 28 [5], (2013), pp 1170-1179.
DOI: 10.1002/jbmr.1825

Y. Noyama, T. Nakano, T. Ishimoto, T. Sakai and H. Yoshikawa:
Design and optimization of the oriented groove on the hip implant surface to promote bone microstructure integrity,
Bone, 52 (2013), pp.659-667.
DOI: 10.1016/j.bone.2012.11.005.
 

R. Suetoshi, D. Cretin, S. Ogawa and T. Nakano:
Assessment of the elastic properties of human femoral bone with artificial hip joint by ultrasound transmission, 
Key Engineering Materials, 529-530 (2013), pp. 321-324.
DOI:10.4028/www.scientific.net/KEM.529-530.321. 


 

H. Fukuda, M. Ueda, M. Ikeda and T. Nakano:
Hydrothermal modification of products fabricated by electron-beam melting,
Key Engineering Materials, 529-530 (2013), pp. 580-583.
DOI:10.4028/www.scientific.net/KEM.529-530.580
 
 

M. Tane, T. Nakano, S. Kuramoto, M. Niinomi, N. Takesue, and H. Nakajima:
ω Transformation in cold worked Ti-Nb-Ta-Zr-O alloys with low body-centered cubic phase stability and its correlation with their elastic properties,
Acta Materialia, 61 (2013), pp.139-150.
DOI:10.1016/j.actamat.2012.09.041.
 

N. Mizuta, K. Hattori, Y. Suzawa, S. Iwai, T. Nakano, M. Akashi, H. Ohgushi and Y. Yura:
Mesenchymal stromal cells improve the osteogenic capabilities of mineralized agarose gels in a rat full-thickness cranial defect model,
Journal of Tissue Engineering and Regenerative Medicine, 7 (2013), pp.51-60.
DOI:10.1002/term.495.
 

 

J. Sasaki, T. Matsumoto, H. Egusa, M. Matsusaki, A Nishiguchi, T. Nakano, M. Akashi, S. Imazatoa and H. Yatani:
In vitro reproduction of endochondral ossification using a 3D mesenchymal stem cell construct,
Integrative Biology, 4 (2012), 1207-1214, doi:10.1039/c2ib20027a.

S. Ma, S. Imazato, J-H. Chen, G. Mayanagi, N. Takahashi, T. Ishimoto, T. Nakano:
Effects of a coating resin containing S-PRG filler to prevent demineralization of root surfaces,
Dental Materials Journal, 31 (2012), pp.909-915.
doi:10.4012/dmj.2012-061.
 
 

福田英次、高橋広幸、藏本孝一、岡崎義光、吉川秀樹、中野貴由：
生体為害性を示さないTi-15Zr-4Nb-4Ta合金の電子ビーム積層造形による造形体作製法の確立と疲労特性の解明、臨床バイオメカニクス、33 (2012), pp. 257-264.

H. Fukuda, H. Takahashi, K. Kuramoto, Y. Okazaki, H Yoshikawa and T. Nakano:
Fabrication and clarification of fatigue properties of nontoxic Ti-15Zr-4Nb-4Ta alloy products by electron beam melting method for biomedical application , Japanese Journal of Clinical Biomechanics, 33 (2012), pp. 257-264.

石本 卓也、吉田 喜人、中野 貴由：
走行運動による骨再生時のアパタイト配向化促進効果ならびに力学機能回復、臨床バイオメカニクス、33 (2012), pp. 47-54.

T. Ishimoto, Y. Yoshida and T. Nakano:
Quick recovery in preferential orientation of biological apatite and related mechanical function during bone regeneration by running exercise, Japanese Journal of Clinical Biomechanics, 33 (2012), pp. 47-54.

X. Zhao, M. Niinomi, M. Nakai, J. Hieda, T. Ishimoto and T. Nakano:
Optimization of Cr content of metastable b-type Ti-Cr alloys with changeable Young's modulus for spinal fixation applications, Acta　Biomaterialia  Jul; 8 [6](2012), pp.2392-2400, DOI:10.1016/j.actbio.2012.02.010.

H. Furuya, S. Matsunaga, Y. Tamatsu, T. Nakano, M. Yoshinari, S. Abe and Y. Ide:
Analysis of biological apatite crystal orientation in the anterior cortical bone of the human mandible using microbeam X-ray diffractometry, Materials Transactions, 53  (2012), pp.980-984. 

K. Hayashi, K. Miyata, F. Katsuki, T. Ishimoto and T. Nakano:
Individual mechanical properties of ferrite and martensite in Fe-0.16 mass% C-1.0mass% Si-1.5 mass% Mn steel,
Journal of Alloys and Compounds, 577S, (2013), pp. S593-S596.
DOI: 10.1016/j.jallcom.2012.02.035.

Y. Noyama, T. Miura, T. Ishimoto, T. Itaya, M. Niinomi, and T. Nakano:
Bone loss and reduced bone quality of the human femur after total hip arthroplasty under stress-shielding effects by titanium-based implant , Materials Transactions, 53 [3] (2012), pp.565-570. 

S.-H. Lee, K. Hagihara and T. Nakano:
Microstructural and orientation dependence of the plastic deformation behavior in β-type Ti-15Mo-5Zr-3Al alloy single crystals, Metallurgical and Materials Transactions A, 43 [5] (2012), pp.1588-1597.

T. Morioka, S. Matsunaga, M. Yoshinari, Y. Ide, T. Nakano, H. Sekine and Y. Yajima:
Alignment of Biological Apatite Crystallites at First Molar in Human Mandible Cortical Bone
CRANIO: The Journal of Craniomandibular Practice, 30 [1] (2012), pp.32-40. 

T. Nakano, K. Sasaki, K. Hagihara, T. Ishimoto, Y. Fujii and A. Serizawa:
Single Crystal Growth and its Microstructure in Co-Cr-Mo alloys for Biomedical Applications
Materials Science Forum, Vols.706-709 (2012), pp.561-565.

W. Fujitani, J.-W. Lee and T. Nakano:
Evaluation of Bone Quality in Mandible of Young M-CSF Deficient-Induced Osteopetrotic Mouse
Materials Science Forum, Vols.706-709 (2012), pp.484-487.

H. Fukuda, H. Takahashi, K. Kuramoto and T. Nakano:
Effect of Energy Density of Incident Beam on Mechanical Property of Titanium Alloy Products Fabricated by Electron Beam Melting (EBM) Method
Materials Science Forum, Vols.706-809 (2012), pp.488-491.

N. Ikeo, T. Ishimoto, H. Fukuda and T. Nakano:
Fabrication and Characterization of Porous Implant Products with Aligned Pores by EBM method for Biomedical Application
Advanced Materials Research, 49 (2012), pp.142-145.

A. Matsugaki, G. Aramoto, T. Ishimoto and T. Nakano:
Control of Osteoblastic Cells Behavior by Surface Topography Introduced by Plastic Deformation of Ti Single Crystal with h.c.p. Structure
Materials Science Forum, 706-709 (2012), pp. 549-552.

T. Ishimoto, K. Kawata, T. Sakai, H. Yoshikawa and T. Nakano:
Regeneration of Bone Mass and Bone Quality around Implant with Grooves for Aligning Bone Cells in Rabbit Hindlimb Bones
Materials Science Forum, 706-709  (2012), pp. 510-513.

T. Nakano：
Supplemental Proceedings of TMS2012: Volume 2: Materials Properties, Characterization, and Modeling
TMS (The Minerals, Metals & Materials Society), (2012), pp.797-804

T. Nakano, S. Hata, K.Hayashi and Y. Umakoshi:
Some long-period superstructures and the related motion of dislocations in Al-rich TiAl single crystals, Supplemental Proceedings of TMS2012: Volume 2: Materials Properties, Characterization, and Modeling TMS (The Minerals, Metals & Materials Society), (2012), pp.797-804.

T. Nakano, T. Ishimoto, N. Ikeo and A. Matsugaki:
Advanced Analysis and Control of Bone Microstructure Based on a Materials Scientific Study Including Microbeam X-ray Diffraction,
Progress in Advanced Structural and Functional Materials Design, Springer, (2012), pp.155-167, DOI: 10.1007/978-4-431-54064-9. 

T. Nakano and T. Ishimoto （共著）

“Interface Oral Health Science 2011”, Design of biomaterials for bone replacement based on parameters determining bone quality, Springer, (2012), pp.55-65.

野山義裕、西村直之、蔵本孝一、吉川秀樹 、中野貴由：周囲骨のアパタイト配向化を促進する新規概念からなる人工股関節の開発、まてりあ、51 [1] (2012), pp.19-21. 

Development of novel artifical hip joint introducing the oriented biological apataite of newly formed bone around implant
Y. Noyoma, N. Nishimura, K. Kuramoto, H. Yoshikawa and T. Nakano, materia 51 [1] (2012), pp.19-21. 
 

K. S. Basaruddin, Y. Yoshiwara, N. Takano, T. Nakano and T. Ishimoto:
Prediction of macroscopic properties of vertebral trabecular bone and comparison with Keyak's model,  ,,  日本機械学会第２４回計算力学講演会論文, (2011), pp.F45-F46.  

T. Jr. Matsumoto, S.-H. An, T. Ishimoto, T. Nakano, T. Matsumoto and S. Imazato:
Zirconia-hydroxyapatite composite material with micro porous structure, Dental Materials 27 [11] (2011), pp.e205-e212. 

Y. Yoshiwara, M. Clanche, K. S. Basaruddin, N. Takano and T. Nakano:

Numerical Study on the Morphology and Mechanical Role of Healty and Osteoporotic Vertebral Trabecular Bone, Journal of Biomechanical Science and Engineering, 6 [4] (2011), pp.270-285.

池尾直子、中野貴由：

骨質としてのアパタイト配向性を考慮した骨代替用指向性ポーラスインプラントの設計・開発、臨床バイオメカニクス、32 (2011), pp.1-8.

N. Ikeo and T. Nakano:

Design and fabrication of porous metal implants with a through-hole aligned along

bone axis for bone replacement from the perspective of preferential arrangement

of apatite crystallites as a bone quality parameter  (in Japanese)

M. Tane, T. Nakano, S. Kuramoto, M. Hata, M. Niinomi, N. Takesue, T. Yano and H. Nakajima:
Low Young's Modulus in Ti-Nb-Ta-Zr Alloys: Cold Working and Oxygen Effects
Acta Materialia, 59 [18] (2011), pp.6975-6988.

X. Zhao, M. Niinomi, M. Nakai, T. Ishimoto and T. Nakano:
Development of high Zr-containing Ti-based alloys with low Young's modulus for use in removable implants
Materials Science and Engineering C,  31 [7] (2011), pp.1436-1444. 

K. Hagihara and T. Nakano
Fracture behavior and toughness of NbSi₂-based single-crystals and MoSi₂(C11_b)/NbSi₂(C40) duplex crystals with a single set of lamellae
Acta Materialia, 59 (2011), pp.4168-4176.

U. D. Kulkarni, S. Hata, T. Nakano, M. Mitsuhara, K. Ikeda and H. Nakashima:
Monte Carlo Simulation of Antiphase Boundaries and Growth of Antiphase Domains in Al₅Ti₃ Phase in Al-rich γ-TiAl Intermetallics
Philosophical Magazine, 91 [22] (2011), pp.3068-3078. 

K. Hagihara, Y. Sugino, Y. Fukusumi, Y. Umakoshi and T. Nakano
Plastic Deformation Behavior of Mg₁₂ZnY LPSO-Phase with 14H-Typed Structure
Materials Transactions, 52 [6] (2011), pp.1096-1103.

T. Matsumoto, A. Mizuno, M. Kashiwagi, S. Yoshida, J. Sasaki and T. Nakano
Cell-based fabrication of organic/inorganic composite gel material
Materials, (2011), doi: 10.3390/ma4010327

T. Nakano, W. Fujitani, T. Ishimoto, J.-W. Lee, N. Ikeo, H. Fukuda and K. Kuramoto
Formation of new bone with preferentially oriented biological apatite crystals using a novel cylindrical implant containing anisotropic open pores fabricated by the electron beam melting (EBM) mothod
ISIJ International, 51 [2] (2011), pp.262-268

O. Zhu, L. Zhang, J. Yu, A. Shan, J. Wu, K. Hagihara and T. Nakano
Effects of Cr-addition and lamellar microstructure on the oxidation behavior of single crystal (Mo_0.85Nb_0.15)Si₂
Journal of Alloys of compounds, 509, (2011), pp.1511-1516

J. Wang, T. Ishimoto, T. Nakano, C. Fukuda and S. Mochizuki :
Comparative change in bone density and preferred orientation of biological apatite in unloaded rat femur by sciatic-neurectomy, Proceedings of ECO-MATES 2011, (2011), pp.253-254. 

N. Ikeo, T. Ishimoto and T. Nakano:
Fabrication of three dimensional Ti-6Al-4V structures by EBM method, Proceedings of ECO-MATES 2011, (2011), pp. 251-252. 

M. Todai, P. Wang, K. Hagihara and T. Nakano:
Anomalud fatigue behavior in Ti-Nb single crystals, Proceedings of ECO-MATES 2011, (2011), pp. 53-54. 

K. S. Basaruddin, Y. Yoshiwara, N. Takano and T. Nakano:
Analysis on the Morphology and Mechanical Role of Vertebral Trabecular Bone, The 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM'11), Seoul, Korea, 18-22 September, 2011, pp.1422-1432. 

中野貴由（分担執筆）
「共創・協奏 －産学連携成功のキーワード」
独立行政法人　科学技術振興機構　ＪＳＴイノベーションプラザ大阪　編
アドスリー、(2011), pp.121-129.

中野貴由、吉川秀樹（分担執筆）
「マクロおよびナノポーラス金属の開発最前線」第３章マクロポーラス金属の応用
１．ポーラス金属を用いた生体材料設計
中嶋英雄監修、シーエムシー出版、(2011), pp.184-193

石本卓也、中野貴由
生分解性金属材料
金属（アグネ技術センター）、81 [5] (2011), pp.29-35.