論文

Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting

T. Kimura　T. Nakamoto　M. Mizuno　H. Araki
Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting
Materials Science and Engineering: A, Vol.682, (2017), pp.593-602
dx.doi.org/10.1016/j.msea.2016.11.059

論文

Crystallographic texture control of beta-type Ti-15Mo-5Zr-3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young’s modulus

Takuya Ishimoto, Koji Hagihara, Kenta Hisamoto, Shi-Hai Sun and Takayoshi Nakano
Crystallographic texture control of beta-type Ti-15Mo-5Zr-3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young’s modulus
Scripta Materialia, Vol.132 (2017), pp.34-38
dx.doi.org/10.1016/j.scriptamat.2016.12.038

論文

Development of unique cross-lamellar microstructure, resulting in the drastic increase in fracture toughness in Cr/Ir-codoped (Mo_0.85Nb_0.15)Si₂ crystals

Koji Hagihara, Takaaki Ikenishi and Takayoshi Nakano
Development of unique cross-lamellar microstructure, resulting in the drastic increase in fracture toughness in Cr/Ir-codoped (Mo_0.85Nb_0.15)Si₂ crystals
Scripta Materialia, Vol.131 (2016), pp.19-23
dx.doi.org/10.1016/j.scriptamat.2016.12.029

論文

Formation and structural analysis of 15Mgo-15CaO-8P₂O₅-4SiO₂ glass

Sungho Lee, Takayoshi Nakano and Toshihiro Kasuga
Formation and structural analysis of 15Mgo-15CaO-8P₂O₅-4SiO₂ glass
Journal of Non-Crystaline Solids, Vol.457 (2017), pp.73-76
dx.doi.org/10.1016/j.jnoncrysol.2016.11.020

論文

Successful additive manufacturing of MoSi₂ including crystallographic texture and shape control

Koji Hagihara, Takayoshi Nakano*, Masahiro Suzuki, Takuya Ishimoto, Su yalatu and Shi-Hai Sun
Successful additive manufacturing of MoSi₂ including crystallographic texture and shape control
Journal of Alloys and Compounds, Vol.696 (2017), pp.67–72
dx.doi.org/10.1016/j.jallcom.2016.11.191

論文

Optimally Oriented Grooves on Dental Implants Improves Bone Quality around Implants under Repetitive Mechanical Loading

Shinichiro Kuroshima, Takayoshi Nakano, Takuya Ishimoto, Muneteru Sasaki，Maaya Inoue, Munenori Yasutake and Takashi Sawase
Optimally Oriented Grooves on Dental Implants Improves Bone Quality around Implants under Repetitive Mechanical Loading
Acta Biomaterialia, Vol.48 (2016), pp.433-444
dx.doi.org/10.1016/j.actbio.2016.11.021

論文

High-Temperature Deformation Behavior of (Mo_0.85Nb_0.15)Si₂ Crystals with C40/C11_b Lamellar Microstructure

Koji Hagihara, Haruka Araki, Takaaki Ikenishi, Takayoshi Nakano
High-Temperature Deformation Behavior of (Mo_0.85Nb_0.15)Si₂ Crystals with C40/C11_b Lamellar Microstructure
Materials Science Forum, Vol.879 (2016), pp.677-683
dx.doi.org/10.4028/www.scientific.net/MSF.879.677

論文

Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting

M. Todai, T. Nakano, T. Liu, H. Y. Yasuda, K. Hagihara, K. Cho, M. Ueda, M.Takayama
Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting
Additive Mannufacturing, 13C (2017), pp.61-70
dx.doi.org/10.1016/j.addma.2016.11.001

論文

Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials

Mitsuharu Todai, Takeshi Nagase, Takao Hori, Aira Matsugaki, Aiko Sekita, Takayoshi Nakano:
Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials,
Scripta Materialia, 129C, (2017), pp.65–68
dx.doi.org/10.1016/j.scriptamat.2016.10.028

論文

シンクロ型LPSO構造の力学的性質とキンク変形挙動

萩原幸司，森川龍哉，東田賢二
シンクロ型LPSO構造の力学的性質とキンク変形挙動
金属，Vol.86, No.6 (2016) pp.472-479